Shop for a Gate Motor by Brand
FacebookTwitterGoogle +
Call Toll Free: 1-800-730-8382

Home » Gate Operators » Residential Slide Gate Operators

Manufacturer: Nice
Nice Robuskit400 Slide Gate Operator Kit With Battery Backup
Nice Robuskit400 Slide Gate Operator Kit With Battery Backup

Nice RobusKit400 Gate Operator Kit

Please note that if purchasing this kit, you will receive the new NICE ON2E control transmitter as a replacement of the Nice FLO1R control transmitter.

NICE Robuskit400 110V / 24V DC Battery (Back-Up Included) 110V Commercial/Residential Slide Gate Operator KIT for gates up to 40' & 725 lbs. **This Kit Is A Limited Time Sale While Our Supply Lasts! **

Nice Robuskit400 Manual

Nice Robuskit400 Specs

Nice MOFB Manual

Nice FLO1R Manual

  • 1 Slide Gate Operator
  • 1 Remote Control Transmitters (Nice FLO1R)
  • 1 Plug In Receiver
  • 1 Pair Photo Electric Safety Sensor
  • 1 Flashing Warning Light
  • 1 Battery Backup
  • User-friendly: the BlueBUS system enables users to connect the photocell couples and control unit using just two wires
  • Practical: the control unit and PS124 buffer battery (optional) can be connected by means of a simple connector and can be housed directly inside the motor
  • Advanced: the speed, strength and pause can all be adjusted
  • Intelligent: thanks to the obstacle detection system and automatic programming of the working times. Motor absorption is monitored during movement, self-diagnosis by means of a flashing light. Acceleration and deceleration can be adjusted
  • Safe: acceleration and deceleration can be adjusted at the beginning and end of each opening and closing maneuver.
  • Very quiet: gear motor on bearings
  • Low maintenance "rack and pinion" system. Less maintenance than chain system but requires flat installation surface.
  • 24V DC Battery back up included.
Regarding Chain Link Fence Applications:
The Robuskit400 can be used with a chain link fence when tight controls are held. The gate needs to be made with horizontal and vertical support other than the main frame. This will keep the gate from twisting and will keep the rack and the pinion in close tolerance. Use of a v track on the ground is also recommended this will keep the gate moving in a straight direction. Top rollers or wheels will also be recommended to keep the relationship of the rack to the pinion coherent.The environment for rack and pinion needs to be smooth and level.

Regarding Use of Rack and Battery Backup:
Rack is additional and available upon request. A 24V DC Battery Back-up (with built in charger) is included. Please check our other Robuskit Kits for kits with Rack included.

Nice Gate Operators are technologically advance operators that require installation by a professional and experienced installer. The manual should be read completely.

Price: $498.00

« Previous | Next »