Shop for a Gate Motor by Brand
FacebookTwitterGoogle +
Call Toll Free: 1-800-730-8382

Home » Gate Operators » Commercial Swing Gate Openers

Manufacturer: GTO
GTO PRO SW4000XLS Kit with a FREE GTO F310 (FM137) Digital Wireless Keypad
GTO PRO SW4000XLS Kit with a FREE GTO F310 (FM137) Digital Wireless Keypad

LIMITED TIME SPECIAL PROMOTION: Purchase Includes A Free GTO PRO F310 Wireless Digital Keypad

GTO PRO SW4000XLS Swing Gate Operator is designed for tubular steel, vinyl, wood, or ornamental gates. The PRO4000XLS is for single swing gates. New enhanced motor for faster open/close. Rated for gates up to 650 lbs. & 16 feet. Add the slave unit PRO4200XLS for a double swing gate (below). This is the new version of the discontinued PRO4000 operator.

GTO SW4000XLS Manual

GTO SW4000XLS Specs

GTO SW4000XLS Diagram

GTO SW4000XLS / SW4200XLS Parts Diagram

GTO SW4000XLS / SW4200XLS Control Box Parts Diagram

The 4000XLS has an enhanced motor that provides more power than the previous model. This feature provides a faster open/close speed from as low as 18 seconds. This system is capable of addressing single family residences or multi-family complexes of up to 20 families, and similar light commercial applications. A major improvement with no price increase over the previous model.

Capacity for the new 4000XLS is 16 Feet and 650 lbs. If you need the higher specs of 20 Feet / 1000 lbs, you will need to add the HBP4XL brackets. We offer a kit including the 4000XLS and the HBP4XL Brackets which can be found by entering 4000XLS in our Search Box. The bracket is also sold separately and can be searched by its part number HBP4XL.

This system may qualify for the GTO Solar Tax Credit when purchased with a GTO solar panel. Click here to learn more.

  • 12 volt system, no electrician needed for installation
  • Gate will work during electrical power outage
  • Quick and easy installation, with user friendly instructions
  • Solar Panel Charger available for remote locations
  • Will operate a gate up to 16' long and weighing up to 650 lbs. each leaf if all proper installation procedures are followed. Note: Ball bearing hinges should be used on all gates weighing over 250 lbs (113.4kg).
  • Control box can be mounted in protected area away from receiver (may require longer cables)
  • Receiver unit with antenna and 10' cable can be placed in best location for reception of signal
  • Can be operated by remote transmitter, digital keypad, push button or combination
  • Full systems capable "add on ready" heavy-duty control board includes adjustable obstruction sensing, gate sequencing and auto close settings (0-120 seconds)
  • High cycle capability with true soft start and stop operation
  • Full access ready package includes battery, radio receiver, entry transmitter, AC transformer, and all necessary mounting hardware for a standard installation
  • Can operate as 'push to open' or 'pull to open' (specify when ordering - extra hardware required for push to open)
  • UL rated for Class I, II, III & IV. System certified to be in compliance with UL 325, 5th edition
  • Two-year limited warranty applies to replacing parts from GTO, Inc.

Technical Specifications


  • Powered by resilient 12 volt motor, 16:1 planetary gear drive system
  • Temperature rating of motor: -5F (-28C) to +160F (+71C)
  • Opening time is around 18-25 seconds, depending on the size and weight of the gate
  • Range of arm stroke is up to 22" (56 cm), with arm fully retracted is 46.25" (118 cm), mounting point to mounting point
  • The PRO-SW4000XLS system is powered by a 12 volt DC/7.0 amp hour, sealed, rechargeable battery (included)
  • Optional second battery fits in control box, used for solar applications or high traffic applications, if needed
  • Battery charge maintained by a 120V AC/60 Hz input and 18 VAC at 40 mA; NOTE: Transformer should never be connected directly to any battery
  • The GTO control board can be programmed for pull-to-open or push-to-open
  • Slow Start/Stop for added cycles and system life
  • Auto-memorization of digital transmitter code
  • Charging regulated circuit on control board. "Sleep draw" is 15 mA; "Active draw" is 5 to 9 amps
  • GTO remote-mounted RF receiver tuned at 318 MHz


  • Operator arm
  • AC transformer
  • 12 volt battery
  • Control box/control board
  • Receiver with 10 ft. cable
  • Entry transmitter
  • 6 ft. power cable
  • Mounting hardware
  • Installation/safety manual
  • Caution signs.
  • Warning Beeper
  • Adjustable obstacle-reversing safety feature
Convert to Dual Gate System No, I don't need a second arm for a dual gate system
Yes, I have a dual gate, please add GTO PRO SW4200XLS Slave Swing Gate Operator (+$639.00)
Price: $895.00

« Previous | Next »