Shop for a Gate Motor by Brand
FacebookTwitterGoogle +
Call Toll Free: 1-800-730-8382

Home » Gate Operators » Commercial Swing Gate Openers

Manufacturer: DoorKing
DoorKing 6100-082 Commercial/Residential 1/2 HP (Master) Swing Gate Operator With Battery Back-Up Included
DoorKing 6100-082 Commercial/Residential 1/2 HP (Master) Swing Gate Operator With Battery Back-Up Included

DoorKing 6100-082 Commercial/Residential 1/2 HP (Master) Swing Gate Operator With Battery Back-Up Included

DoorKing 6100-082 Commercial/Residential 1/2 HP Swing Gate Operator 115V With Battery Back-Up For Gates Up To 14" & 500 lbs. Designed to operate vehicular swing gates in residential and commercial applications. (See Model 6100-083 If 2nd Arm With Battery Back-Up Is Necessary For Dual System)

You must add a post or pad mount kit to compete the order for this product.

DoorKing 6100-082 PDF Manual

These operators are designed so that they can be either pad or post mounted without any costly and time consuming field modifications. You need to specify which mounting method when ordering.

The unique design of these operators allows the gate arm to attached to the bottom rail of the gate. This eliminates the need for any brackets to be welded to the face of the gate and creates an aestetically pleasing installation. The 6100 can be equipped with a factory installed DC Convenience Open option which will automatically open the gate in the event of a power outage.


Self-adjusting, no maintenance limits.
Overlap feature for dual swing gate operation.
Designed with a built-in primary and secondary entrapment prevention system.
Ports for plug-in loop detectors.
Fail-safe release.
Tamper detect circuit.
DC Powered convenience open (Option on 6100 only).
Gate tracker reporting output.
Programming switches.
Built-in reset switch.
Built-in power On/Off switch.


DoorKing Model 6100
Maximum gate width 14-feet.
Maximum gate weight 500 pounds*.
(*Assumes gate swings level and is in good condition with properly adjusted hardware. Other external factors may affect the performance of the gate operator.)
Swings gate 90 degrees in approximately 10-seconds.
1/2 HP continuous-duty motor.
115 VAC, 5.4 Amps.
Class I and Class II applications.
Compliant with UL 325 and 991. ETL listed.

(Note: To be compliant with UL 325 and industry safety guidelines, additional secondary entrapment prevention devices may need to be installed with this gate opertator. Your professional electronic gate operator system installer can provide you with more details on these devices and on current industry safety standards.)
Dimensions (operator only): 13.25"W x 12"H* x 23"D (28"D with convenience open option)
(* Height of operator only. Actual height above ground is determined by which mounting method is used)


Master / slave connection cable (6050 slave operator is shipped with 30-feet of cable; 6100 slave operator is shipped with 40-feet of cable.).
Post or pad mount - specify which.
DC powered convenience open (6100 only).
Plug-in loop detectors.
Heater kit for cold environments.

  • Single family residential gate operator
  • Advanced microprocessor control board eliminates mechanical relays, limit switches and reversing contactors.
  • Automatic limit settings means no limit switch adjustments - ever
  • DoorKing's plug-in loop detectors simplify wiring and makes installation easy
  • Mechanical and electronic inherent entrapment sensing system operable in both the open and close direction.
  • The two-stage electronic and mechanical self-checking inherent reverse system makes these operators the safest on the market
  • Automatic close timer is adjustable from 1 to 23 seconds.
  • Two ports for plug-in loop detectors.
  • Built-in reset switch.
  • Gate overlap feature starts the master operator 1-2 seconds prior to the slave operator.
  • Magnetic lock output provided for direct connection of mag locks to the circuit board.
  • Tamper protect feature causes motor to run in the close direction if an attempt is made to force the gate open.
  • Gate Tracker™ reporting output sends gate operator data to a companion DoorKing access control system.
  • SPEED: 90º in approximately 10-12 seconds
  • Miximum gate weight 500lbs, maximum length 14 ft
  • DC back-up available as an option
  • 6000 series operators can be pad or post mounted allowing great flexibility to meet exact on-site requirements


**Appx Weight = 150 lbs.

Price: Please call for special pricing (800) 730-8382

« Previous | Next »